How To Put Ink Cartridges In HP Printer? Take HP Support For Ideas
Whether you
just got a new HP printer device for your office or home or else it’s time to
replace an empty ink cartridge in your existing printer, putting an ink
cartridge will be required in your printer which will only take a few minutes.
Once your HP printer is on, just take out your new ink cartridge from the
package, open your ink tray and replace any old cartridges with your new ones. Putting
a new cartridge for your HP printer is an easy way. So, do it instantly or else
if you don’t have knowledge to insert ink cartridges, you need to grab HP Support assistance from our well-qualified
technicians. They will direct you the entire filling-up procedure in no time. Therefore,
don’t wander and waste your time, just stick your eyes over here.
Steps To Put Ink Cartridges In HP Printer
Go through
the below-mentioned procedure one-by-one simultaneously to end-up this process
within a pinch also without putting effort. Take a look at the given steps:
·
Open the ink tray from the center
of your printer
Ø
Make sure that your printer is
plugged-in and turned-on. In order to check out the ink level, your printer
must be powered-on
Ø
The ink cartridges will slide into
view in the center of your printer
Ø
While some other HP printers such
as the HP All-in-One printers, there is a top lid which you need to lift-up to
access the ink cartridges
·
Remove the present ink cartridges
from your printer. If there are already ink cartridges in your printer, then
replace it to the new one. Do it by following the given steps:
Ø
Press down on the ink cartridge you
want to eradicate
Ø Once you hear the click and see the existing ink cartridge popped out, pull the rest of the way out
Ø Some HP printers have individual cartridges for each color. If you have one of these printers, the process is the same. Just pop out each individual cartridge you want to replace.
Ø Once you hear the click and see the existing ink cartridge popped out, pull the rest of the way out
Ø Some HP printers have individual cartridges for each color. If you have one of these printers, the process is the same. Just pop out each individual cartridge you want to replace.
Ø
Tear the package to reveal the new
cartridge
Ø
Your cartridge will either have a
blue top or a black top unless you have individual cartridges for each color
Ø
Remove the protective tab on the
ink cartridge
Ø
Do not try to touch the
copper-colored area of the cartridge or the ink nozzles. Touching such area may
cause clogs, ink failure, or a disconnection if your fingerprints smudge the
area
·
Insert your new ink cartridges
Ø
Insert your cartridge into the slot
with the ink nozzles by facing away from you
Ø
Your ink cartridges will have two
small plastic tabs on the top of your cartridge close to the sticker that says
you the ink number. These tabs should be closer to you. Make sure the ink
nozzle is facing away from you
Ø
The color cartridge goes on the
left side. The black cartridge on the right side
Achieve HP Printer Support For Efficacious Results
In
case, the above written steps is not helping you out in putting ink cartridges
on HP printer, you need to obtain HPPrinter Support which is reliable and trustworthy. The helpline number is
noted here, so by placing a call you will be in touch with dexterous
technicians.
Comments
Post a Comment